_______________________________________________________________________________________

 

GENERAL TANK SPECIFICATIONS-2005 Model Tank

Tank Model and Size:  Seneca Tank “FuelMaster” Model LP28A, 2800 gallon, 4 compartment, compartment sizes (1000-800-500-500) +9% outage, aluminum construction, all double bulkheads, 16” manholes with 10” fills, non-skirted elliptical design tank, (2) ladders both side rear with full width platform between ladders, enclosed rear bucket box with canopy style rear door and side hose reel doors, C springs on hose reel doors, stainless steel hinges on all doors, 3” piping to the rear, 3” permanent suction-discharge lines, indicator rods in each compartment with (2) discs per rod set, second disc set at 800-600-400-400,  Betts L.E.D. lights with (2) extra brake lights above rear door, tank MC-406. 

Partial 5 year tank warranty remaining. 

      (1)  Inbreathing vent installed in each manhole

(1)     6" x tank length hose tube installed each side

(1)     84” aluminum weld-on cabinet installed each side with single lift-up door

3” Air operated internal valves with control panel in rear bucket box

Piping Rotation:  1-2-3-4

_______________________________________________________________________________________

HEAVY DUTY FRAME SPECIFICATIONS

Frame  .385 (3/8”) x 10” x tank length extruded sub-frame, full length with ¼” pad between frame rail and barrel 

Outriggers  ¼” Outriggers with ¼” pad between outriggers and barrel at every head and baffle

 

Crossmembers     ¼” Crossmembers with ¼” pad between crossmembers and barrel at every head and baffle

_______________________________________________________________________________________

PUMPING SYSTEMs

Pumps          Size       2-1/2”    Curbside                        Model:  TXD2-1/2A Blackmer

                           2-1/2”   Streetside                                  Model:  TXD2-1/2A Blackmer 

Line Strainers    2-1/2” Blackmer “T” style 

Dry Break Adapters     (4)  3" Emco Wheaton Brass with dust caps 

Dry Break Couplers      (2)  3" Emco Wheaton 90 Swivel Elbow  

Jumper Hoses                (2)  3" x 5'  Corrugated flextra

Delivery Hoses       1-1/2”   x    Curbside        Premium Redwing

                                   1-1/2”   x    100’   Streetside      Premium Redwing

 

Nozzles                        1-1/2" OPW #295     Curbside

                                       1-1/2" OPW #295 Streetside 

Meters                       L.C.    Size 2”  150 GPM  Ticket Printer Curbside

L.C.   Size 2”  150 GPM  Ticket Printer  Streetside

                              Rear Facing  High Capacity Air Eliminators Included

 

State Split                        Required                        Yes   ý   

Pressure Gauge   Installed on both pumping systems for monitoring pump bypass

                                  pressure settings 

Hose Reels                        Electric    Curbside     Inverted 

                        Electric    Streetside   Inverted   

Delivery Hose             

Swivels                        On nozzles 

Spit Tanks         Curbside      Streetside    Aluminum tanks with sight tubes.

                        With closed line drain system to suction side of pumps 

PTO    Cab Mounted    (no)                    

Controls      Rear Controls in Bucket Box      Yes  ý        ClutchPak PTO's  ý 

Clutch         None needed with ClutchPak PTO’s 

Throttle    Switch installed in rear and connected to throttle of engine 

Paint      Painted white and gray  

Lettering                        Customer to letter.