________________________________________________________________________________________

 

GENERAL TANK SPECIFICATIONS-2005 Model TANK

Tank Model and Size:  Seneca Tank “FuelMaster” Model LP45A, 4500 gallon, 4 compartment, compartment sizes (1000-2000-1000-500), Almac aluminum construction, all double bulkheads, 16” manholes with 10” fills, non-skirted elliptical design tank, (2) ladders both side rear with full width platform between ladders, enclosed rear bucket box with canopy style rear door and side hose reel doors, C springs on hose reel doors, stainless steel hinges on all doors, 3” piping to the rear, 3” permanent suction-discharge lines, indicator rods in each compartment with (1) disc per rod set at rated capacity of compartment, second disc set at 800-1500-700-400,  Betts L.E.D. lights with (2) extra brake lights above rear door, tank MC-406.

(Partial 5 year tank warranty remaining.)

      (1)  84” aluminum weld-on cabinet installed each side with single lift-up door

(1)  Inbreathing vent installed in each manhole

(1)     6" x tank length hose tube installed each side

3” Emco Wheaton AIR OPERATED internal valves with control panel in rear bucket box

 

Piping Rotation:  1-2-3-4

________________________________________________________________________________________

 

HEAVY DUTY FRAME SPECIFICATIONS

Frame      .385 (3/8”) x 10” x tank length extruded sub-frame, full length with ¼” pad between frame rail and barrel 

Outriggers   ¼” Outriggers with ¼” pad between outriggers and barrel at every head and baffle 

Crossmembers   ¼” Crossmembers with ¼” pad between crossmembers and barrel at every head and baffle

________________________________________________________________________________________

PUMPING SYSTEMs

Pumps    Size                        2-1/2”                        Curbside                        Model:  TXD2-1/2A Blackmer

                                                2-1/2”                        Streetside                        Model:  TXD2-1/2A Blackmer

 

Line Strainers     2-1/2” Blackmer “T” style

 

Dry Break Adapters         (4)  3" Emco Wheaton Brass with dust covers 

 

Dry Break Couplers       (2)  3" Emco Wheaton 90 Swivel Elbow  

 

Jumper Hoses        (2)  3" x 5'  Corrugated flextra

 

Delivery Hoses      1-1/2” x  100’   with 1-1/2” female quick coupler   Curbside

                        1-1/2” x  100’   with 1-1/2” female quick coupler    Streetside

 

Nozzles      1-1/2" OPW #295 with swivel  with 1-1/2” male adapter  Curbside

                        1-1/2" OPW #295 with swivel  with 1-1/2” male adapter  Streetside

 Meters  LC 2" 150 gpm ticket printer curb side L.C.    Size 2”   150 GPM   Ticket Printer   Streetside

                        Both meters to be rear facing. Printers to be face down, bottom end in first.

 

State Split    Required        Yes   ý    No 

Compartment Test     Check State requirements and advise   

Pressure Gauge  Installed on both pumping systems for monitoring pump bypass

                        pressure settings 

Hose Reels    Electric    Curbside       Inverted 

                        Electric    Streetside    Inverted   

Delivery Hose      Curbside           On Nozzle 

Swivels     Streetside         On Nozzle   

Spit Tank  Curbside   (yes)     Streetside  (yes)

 Aluminum tanks with sight tubes.                With closed line drain system to suction side of pumps

 

PTO         Cab Mounted                                No        

Controls       Rear Controls in Bucket Box              Yes  ý     No      ClutchPak PTO's  ý

                                                PTO’s auto off with brake release 

Clutch   None needed with ClutchPak PTO’s 

Throttle    Switch installed in rear and connected to throttle of engine 

Paint     Painted white and gray per customer’s last units 

Lettering       Customer to letter.