Fax 515-265-8794 800-362-2910 515-262-5900
Home | Sitemap | Contact Seneca | Inventory | Tank Truck Info | Chassis | Catalogs
|
Fax 515-265-8794 800-362-2910 515-262-5900 Home | Sitemap | Contact Seneca | Inventory | Tank Truck Info | Chassis | Catalogs
|
|
pin 34187 shop photos! scroll down for spec's
3/25
3/18
3/14
click small photo to enlarge -return with back button
KW T800
click small photo to enlarge-return with back button
Check out our website at www.senecatank.com GENERAL TANK SPECIFICATIONS-Lp series tanks Tank Model and Size: Seneca Tank “FuelMaster” Model LP45A, 4,500-gallon, 5-compartment, compartment sizes (1000-1000-1000-1000-500), Almac aluminum construction, non-skirted elliptical design tank, all double bulkheads, (2) ladders both side rear with full width platform between ladders, enclosed rear bucket box with canopy style rear door and side hose reel doors, C springs on hose reel doors, stainless steel hinges on all doors, indicator rods in each compartment with (1) disc per rod, Betts LED lights with (2) extra brake lights above rear door, tank DOT-406. 5 year tank warranty. Manholes: 16” manholes with offset 10” fills for future air vent installation Piping and Emergency Valves: Air ý 3” emergency valves with 3” piping to the curbside Valve Operator Location: Built in to control panel in rear bucket box Longitudinal Baffles: None Suction Lines: 3” Aluminum Hard Pipe w/HD Victaulic couplings Discharge Lines: 3” Aluminum Hard Pipe w/HD Victaulic couplings Cabinets: Curbside (1) 88” aluminum weld-on cabinet with single lift-up door Streetside (1) 72” aluminum weld-on cabinet with single lift-up door Walkway: None Hose Carrier: (1) 6” by tank length hose tube installed streetside Venting: (1) Inbreathing vent installed in each manhole _______________________________________________________________________________________ HEAVY DUTY FRAME SPECIFICATIONSFrame .385 (3/8”) x 10” x tank length extruded sub-frame, full length with ¼” pad between frame rail and barrel Outriggers ¼” Outriggers with ¼” pad between outriggers and barrel at every head and baffle Crossmembers ¼” Crossmembers with ¼” pad between crossmembers and barrel at every head and baffle. Shell ¼” thick in the belly and 3/16” thick in the side. PUMPING SYSTEMsPumps Size: 2-1/2” Curbside Model: TXD2-1/2A Blackmer with air bypass kit 2-1/2” Streetside Model: TXD2-1/2A Blackmer Line Strainers Blackmer “T” Style 2-1/2” Bottom Load - Openable API bottom load valves installed in curbside cabinet - Vapor to curbside rear with 3” air top vent installed in manholes and hosed to vapor rail - Brake interlock installed on vapor; brake interlock bar installed across the API’s - Load Any Rack overfill system with (2) plugs and ST-47 Ground Hog - (2) gravity drop caps shipped loose with unit. Manifold - 3” dual bank air operated manifold installed in the curbside cabinet. (The air operated manifold will have a presettable control panel installed in the rear bucket box.) - (1) 3” butterfly valve with 3” male adapter, sight glass, and dust cap installed on each bank of the manifold for gravity drop and suction. - 1-1/2” Male product returns on manifold Delivery Hoses 1-3/8” x 125’ ý Curbside 1-3/8”x 75’ ý Streetside Nozzles 1-1/2” Philly with swivel & sight glass ý Curbside 1-1/2” Philly with swivel ý Streetside
Meters LCR2 ý Size 2” 150 GPM, Electronic Preset ý Printer in cab ý Curbside LCR2 ý Size 2” 100 GPM, Electronic Preset ý Printer in cab ý Streetside Both Meters to be rear facing. printer stand in cab for 2 Epson printers State Split Required Yes ý Compartment Test Check State requirements and advise Pressure Gauge Installed on both pumping systems to monitor pump bypass pressure settings Hose Reels 1.5" Hanney Electric ý Overhead ý Curbside 1.5" Hanney Electric ý Overhead ý Streetside Center hose reel 2" Hanney electric reel and 2"x50' hose with Scully Nozzle and swivel 3-way diverter valve on curbside and streetside pumping systems between meters and hose reel. This reel faces the rear and is shelf mounted! Delivery Hose Built into nozzle ý Curbside Swivels Built into nozzle ý Streetside Direct Pump-Off (1) 2” 3-way diverter valve with 2” Emco Wheaton dry break adapter installed between curbside meter and hose reel for direct pump-off. Spit Tanks Curbside ý Streetside ý Aluminum tanks with sight tubes. PTO Cab Mounted No ý Controls Rear Controls in Bucket Box Yes ý ClutchPak PTO's ý PTO’s auto off with brake release Clutch None needed with ClutchPak PTO’s Throttle High/low flow control installed on curbside pumping system. Connected to the throttle of the engine. Actuater switch installed by the hose reel switch. Paint Tank natural POLISHED aluminum Lettering There is a $200 lettering allowance included in this bid; all other charges will be billed to the customer. Tank installed on chassis. Tank and pumping system checked with Seneca Tank's 13 point factory tech testing. Tank and Equipment, including all miscellaneous parts and labor OPTIONS: 1. Trucknology product indicators installed on curbside cabinet door. _______________________________________________________________________________________ TRUCK EQUIPMENT PTO's: Dual ý Transmission Type: 10 Speed See Below PTO Shafts: ý See Below PTO percentages to be used: 52% RH Port LH Port 54% Bottom Port Complete tank, pumping systems, and truck equipment F.O.B. Des Moines, IA See Below CHASSISChassis Model No.: Kenworth T800
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Seneca Tank 5585 NE 16th Street Des Moines, Iowa 50313
|
