_______________________________________________________________________________________
GENERAL TANK
SPECIFICATIONS-Lp series tanks
Tank Model and
Size: Seneca Tank “FuelMaster” Model LP45A, 4,500-gallon,
5-compartment, compartment sizes (1000-1000-1000-1000-500), Almac
aluminum construction, non-skirted elliptical design tank, all double
bulkheads, (2) ladders both side rear with full width platform
between ladders, enclosed rear bucket box with canopy style rear door
and side hose reel doors, C springs on hose reel doors, stainless steel
hinges on all doors, indicator rods in each compartment with (1) disc
per rod, Betts LED lights with (2) extra brake lights above rear door,
tank DOT-406. 5 year tank warranty.
Manholes:
16” manholes with offset 10” fills
for future air vent installation
Piping and Emergency Valves: Cable
3” emergency valves
with 3” piping to the curbside to end in flanges for future API
installation, tee’d underneath with 2” piping to rear for dry break
installation
Valve Operator Location: A rear
overhead Longitudinal Baffles: None
Suction Lines: 3” Aluminum Hard Pipe
w/HD Victaulic couplings
Discharge Lines:
2” Aluminum Hard Pipe w/HD Victaulic couplings
Cabinets:
Curbside (1) 88” aluminum weld-on cabinet with single lift-up door
Streetside (1) 72” aluminum weld-on cabinet with single lift-up door
Walkway:
None
Hose Carriers:
(1) 6” by tank length hose
tube installed streetside.
Venting:
(1) Inbreathing vent installed in each manhole
_____________________________________________________________________________________
HEAVY DUTY FRAME SPECIFICATIONS
Frame
.385 (3/8”) x 10” x tank length extruded sub-frame, full
length with ¼” pad between
frame rail and barrel
Outriggers ¼”
Outriggers with ¼” pad
between outriggers and barrel at every head and baffle
Crossmembers ¼”
Crossmembers with ¼” pad
between crossmembers and barrel at every head and baffle.
Shell ¼” thick in the belly and 3/16”
thick in the side.
PUMPING SYSTEMs
Pumps
Size: 2-1/2”
Curbside Model:TXD2-1/2ABlackmer
2-1/2” StreetsideModel:TXD2-1/2ABlackmer
Line Strainers
PT Aluminum 2”
Bottom Load
- Provisions for future installation.
Dry Break
Adapters (5) 2" Emco Wheaton Brass – In rear bucket box
Dry Break
Couplers (2) 2" Emco
Wheaton 90
Swivel Elbow – In rear bucket box
Jumper Hoses
(2) 2" x 5' Corrugated flextra
– In rear bucket box
Delivery Hoses 1-3/8” x 125’ Curbside
1-3/8” x 75’ Streetside
Nozzles
1-1/2” EBW 410 manual
ý
Curbside
1-1/2” EBW 410 manual
ý
Streetside
Meters
LCR2
ý
Size 2” 100 GPM Electronic Preset
ý
Printer in cab
ý
Curbside
LCR2
ý
Size 2” 100 GPM Electronic Preset
ý
Printer in cab
ý
Streetside
Both meters to be rear facing
State Split
Required Yes
ý
Compartment
Test Check State
requirements and advise
Pressure Gauge Installed on both
pumping systems to monitor pump bypass
pressure settings
Hose Reels Electric
ý
Curbside ý
Overhead ý
Electric
ý
Streetside
ý Overhead
ý
Delivery Hose
Built into nozzle
ý Curbside
Swivels Built
into nozzle
ý Streetside
Spit Tanks
Curbside ý
Streetside ý
Aluminum tanks with sight tubes.
With closed line drain system to suction
side of pumps
PTO
Cab Mounted No
ý
Controls Rear
Controls in Bucket Box Yes
ý
ClutchPak PTO's
ý
PTO’s auto off with
brake release
Clutch
None needed with ClutchPak PTO’s
Throttle
Cab
Paint Tank
natural aluminum
Lettering There is a $200 lettering allowance included in this bid, all other
charges
will be billed to the customer.
Tank installed on
chassis. Tank and pumping system checked with
Seneca Tank's 13 point factory tech
testing.
Tank and Equipment,
including all miscellaneous parts and labor See Below
Options:
1. (1) 2” 3-way diverter valve with 2”
Emco Wheaton dry break adapter installed between curbside meter and hose
reel for direct pump-off.
________________________________________________________________________________________
TRUCK EQUIPMENT
PTO's:
Dual ý
Transmission Type: _____ See Below
PTO Shafts
ý
See Below
Complete tank, pumping
systems, and truck equipment F.O.B. Des Moines, IA
_______________________________________________________________________________________
CHASSIS
Chassis Model No.:
Freightliner M2 Chassis Spec's Attached Yes
ý
Year: 2009
New ý
W.B. 245” C.T. 174”
_______________________________________________________________________________________
